31.20.1 port ipbpvc edgerouter delete Command
Syntax:
port ipbpvc edgerouter delete <ip-address> <vid>
where
<ip-address> =
<vid>
This command deletes the edge router with the specified IP address and VLAN ID.
The following example deletes edge router 192.168.1.244 with VID 402.
ras> port ipbpvc edgerouter delete 192.168.1.244 402
31.20.2 port ipbpvc edgerouter set Command
Syntax:
port ipbpvc edgerouter set <ip/mask> <vid>
where
<ip/mask> =
<vid>
This command creates an edge router with the specified IP address, subnet mask, and VID.
The MSC uses the VLAN ID when it forwards frames to the edge router. It also uses the
VLAN ID to identify the domain the edge router is in.
The following example creates edge router 192.168.1.244 with subnet mask 255.255.255.0
and VID 402.
ras> port ipbpvc edgerouter set 192.168.1.244/24 402
31.20.3 port ipbpvc edgerouter show Command
Syntax:
port ipbpvc edgerouter show <all | domain-name [<vid>]>
where
<domain name> =
<vid>
This command displays the edge routers for the specified VLAN or for all VLAN.
MSC1000G/1024G/1224G Series User's Guide
IP address, in dotted decimal notation.
The ID (<1..4094>) of the VLAN.
=
Edge router's IP address, in dotted decimal notation and number of bits
<1..32> in the subnet mask.
The ID (<1..4094>) of the VLAN.
=
The name of the domain.
The ID (<1..4094>) of the VLAN.
=
Chapter 31 port Commands
723