ZyXEL Communications MSC1024G Series User Manual page 154

Chapter 6 Alarm Screens
Table 47 Alarm Descriptions (continued)
ALARM
CPU_UTIL_HIGH
VOP_BATTERY_FAIL
VOP_CLOCK_FAIL
VOP_RINGER_FAULT
PKTBUFF_LOW
MEMORY_USAGE_HIGH
STP_NEW_ROOT
System
REBOOT
CONFIG_CHANGE
CONFIG_UPLOAD_OK
CONFIG_UPLOAD_FAIL
TIME_SYNC_FAIL
ALARM_CUT_OFF
ALARM_CLEAR
LOGIN_FAIL
LOGIN_OK
ACCOUNT_ADD
ACCOUNT_DELETE
ACCOUNT_MODIFY
SVR_SYNC_PROF_OK
SVR_SYNC_PROF_FAIL
CLI_SYNC_PROF_OK
CLI_SYNC_PROF_FAIL
ANTI_SPOOFING
CLUSTER_MBR_ACTIVE
154
SEVERITY MSC ALC SLC VLC VOP IMA DESCRIPTION
MAJOR X
CRITICAL
CRITICAL
CRITICAL
MAJOR
MAJOR
MINOR
INFO X
INFO X
INFO X
MAJOR X
MINOR X
INFO X
INFO X
MINOR X
INFO X
INFO X
INFO X
INFO X
INFO X
INFO X
INFO X
INFO X
Minor X
INFO X
The MSC is overloading.
X A VOP card's battery failed.
X A VOP card's clock failed.
X A VOP card's ringer failed.
The buffer storage for packet
transmission is too low. This
might cause some incoming
packets to be dropped.
The memory usage is too high.
Spanning Tree Protocol detects
a new root bridge.
The system restarted.
The system configuration has
changed.
Uploading of the system
configuration was successful.
Uploading of the system
configuration failed.
Synchronizing the time with a
timeserver failed.
An administrator cutoff
(canceled) an alarm.
An administrator cleared the
alarms.
A user failed to login.
A user logged in successfully.
A user account was added.
A user account was deleted.
A user's account was modified.
Server-initiated profile
synchronization is successful.
Server-initiated profile
synchronization failed.
Client-initiated profile
synchronization is successful.
Client-initiated profile
synchronization failed.
A system connected to the MSC
detected a MAC address
connected to more than one
port.
The cluster manager has
established a connection with a
particular cluster member.
MSC1000G/1024G/1224G Series User's Guide