The following example turns on the Annex L feature for port 7 on the line card in slot 5.
ras> port adsl annexl enable 5-7
31.4.4 port adsl annexm disable Command
Syntax:
port adsl annexm disable <slot-port>
This command turns off the Annex M double upstream feature on the specified ADSL2/2+
port(s).
The following example turns off the Annex M feature for port 5 on the line card in slot 7.
ras> port adsl annexm disable 7-5
31.4.5 port adsl annexm enable Command
Syntax:
port adsl annexm enable <slot-port>
This command turns on the Annex M double upstream feature on the specified ADSL2/2+
port(s). This has the upstream connection use tones 6 to 63.
The following example turns on the Annex M feature for port 5 on the line card in slot 7.
ras> port adsl annexm enable 7-5
31.4.6 port adsl annexi disable Command
Syntax:
port adsl annexi disable <slot-port>
This command turns off the Annex I all digital mode feature on the specified ADSL2/2+
port(s).
The following example turns off the Annex I feature for port 5 on the line card in slot 7.
ras> port adsl annexi disable 7-5
31.4.7 port adsl annexi enable Command
Syntax:
port adsl annexi enable <slot-port>
This command turns on the Annex I all digital mode feature on the specified ADSL2/2+
port(s). With Annex I, the ADSL connection uses the full spectrum of the physical line and the
user can not use POTS or ISDN service.
MSC1000G/1024G/1224G Series User's Guide
Chapter 31 port Commands
701