ZyXEL Communications MSC1024G Series User Manual page 197

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Figure 113 Multicast > IGMP > Port Setup

The following table describes the labels in this screen.

Table 67 IGMP Port Setup

IGMP Message

MSC1000G/1024G/1224G Series User's Guide

Select the number of a line card's slot.

Select the number of a DSL port on the line card.

Click Load to retrieve the port's IGMP filter profile setting and display it in the

Profile drop-down list box.

Select an IGMP filtering profile.

Select Enable and enter the maximum accumulated bandwidth (in Kbps) allowed

for the multicast traffic flowing through the port.

Select Enable and enter the maximum number of multicast groups of which the port

can be a member.

Select Enable and enter the maximum number of multicast packets allowed to flow

through the port in a second.

Click Apply to have the specified DSL port use the IGMP port setting.

Click Cancel to close the screen without saving your changes.

Chapter 10 Multicast Screens

Troubleshooting

Msc1224g series Msc1000g series