Chapter 34 switch Commands
This command turns on OAM functionality for the selected Ethernet line card port.
The following example turns on OAM functionality for port 13 on the Ethernet line card in
slot 7.
ras> switch oam port enable 7-13
34.11.3 switch oam port mode Command
Syntax:
switch oam port mode <slot-port> active|passive
This command sets whether the Ethernet line card port is to initiate OAM status exchange
requests (active) or only respond to them (passive).
The following example sets port 13 on the Ethernet line card in slot 7 to the active OAM
mode.
ras> switch oam port mode 7-13 active
34.11.4 switch oam port rmtlpbk disable Command
Syntax:
switch oam port rmtlpbk disable <slot-port>
This command sets the Ethernet line card port to not send or respond to OAM remote
loopback tests.
The following example disables OAM remote loopback tests on port 13 on the Ethernet line
card in slot 7.
ras> switch oam port rmtlpbk disable 7-13
34.11.5 switch oam port rmtlpbk enable Command
Syntax:
switch oam port rmtlpbk enable <slot-port>
This command sets the Ethernet line card port to send and respond to OAM remote loopback
tests.
The following example enables OAM remote loopback tests on port 13 on the Ethernet line
card in slot 7.
ras> switch oam port rmtlpbk enable 7-13
34.11.6 switch oam show Command
Syntax:
switch oam show <slot>
894
MSC1000G/1024G/1224G Series User's Guide