ZyXEL Communications MSC1024G Series User Manual page 131

Figure 68 ACL > PPPoE
The following table describes the labels in this screen.
Table 36 ACL > PPPoE
LABEL
VID
Enable
Option Mode
Info
Apply
New
Cancel
Index
VID
Enable
Option Mode
Info
Modify
Delete
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Enter a VLAN ID (between 1 and 4094).
Turns PPPoE line information for the VLAN on or off.
Select private to use ZyXEL's proprietary method to encode PPPoE discover
packets on the specified VLAN.
Select tr101 to use TR-101 to encode PPPoE discover packets on the specified
VLAN.
Select tr101 to use TR-101 to encode PPPoE discover packets on the specified
VLAN and include the VLAN ID.
See Section 5.1.1 on page 93
Specify (up to 24 characters) of PPPoE line information.
Click Apply to save the changes in this screen to the system's volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config
Save on the navigation panel and then the Save button to save your changes to the
non-volatile memory when you are done configuring.
Click New to clear the fields so you can create a new entry.
Click Cancel to begin configuring this screen afresh.
This is the index number of an entry.
This is the ID number of the VLAN group.
This field displays whether or not encoding of PPPoE line information in the VLAN's
PPPoE discover packets is turned on.
This field displays the type of encoding for PPPoE line information in the VLAN's
PPPoE discover packets.
This field displays the PPPoE line information.
Select an entry's Select radio button and click Modify to display the entry in the
table above so you can edit it.
Select an entry's Select radio button and click Delete to remove the entry.
Chapter 5 Access Control List Screens
for more on these modes.
131