Chapter 30 multicast Commands
The following example sets ADSL port 9 in slot 7 to use the
ras> multicast igmpfilter set 7-9 voice
30.9.2 multicast igmpfilter show Command
Syntax:
multicast igmpfilter show <slot>
This command displays which IGMP filter profile DSL ports are using.
The following example displays which IGMP filter profiles the DSL ports in slot 3 are using.
ras> multicast igmpfilter show 3
<<slot3 igmpfilter configuration>>
port igmpfilter
---- -------------------------------
1 DEFVAL
2 DEFVAL
3 DEFVAL
4 DEFVAL
5 DEFVAL
6 DEFVAL
7 DEFVAL
8 DEFVAL
9 DEFVAL
------------------------- [snip] -------------------------
44 DEFVAL
45 DEFVAL
46 DEFVAL
47 DEFVAL
48 DEFVAL
30.10 multicast igmpmsgcount Commands
Use these commands to limit the number of IGMP control messages allowed to flow through
the specified slot and port.
30.10.1 multicast igmpmsgcount disable Command
Syntax:
multicast igmpmsgcount disable <slot-port>
This command disables limiting the number of IGMP control messages allowed to flow
through the specified slot and port.
30.10.2 multicast igmpmsgcount enable Command
Syntax:
multicast igmpmsgcount enable <slot-port><count>
680
IGMP filter profile.
voice
MSC1000G/1024G/1224G Series User's Guide