Multicast Mvlan Delete Command; Multicast Mvlan Disable Command; Multicast Mvlan Enable Command; Multicast Mvlan Group Delete Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 30 multicast Commands

30.11.1 multicast mvlan delete Command

Syntax:
multicast mvlan delete <vid>
This command removes the specified multicast VLAN configuration.

30.11.2 multicast mvlan disable Command

Syntax:
multicast mvlan disable <vid>
This command deactivates the specified multicast VLAN. The following example disables
multicast VLAN 12.
ras> multicast mvlan disable 12

30.11.3 multicast mvlan enable Command

Syntax:
multicast mvlan enable <vid>
This command activates the specified multicast VLAN.

30.11.4 multicast mvlan group delete Command

Syntax:
multicast mvlan group delete <vid> <index>
This command removes the specified multicast VLAN group setting.

30.11.5 multicast mvlan group set Command

Syntax:
multicast mvlan group set <vid> <index> <start-mcast-ip> <end-mcast-ip>
where:
<index>
<start-mcast-ip>
<end-mcast-ip>
This command creates a multicast VLAN group. The following example creates a multicast
VLAN with VID 10 and group index 1. The multicast address range is 224.224.224.1 ~
224.224.224.10.
ras> multicast mvlan group set 10 1 224.224.224.1 224.224.224.10
682
= Multicast group number (1 -16).
= Start of the multicast IP address range.
End of the multicast IP address range.
=
MSC1000G/1024G/1224G Series User's Guide