The Localcall Screen - ZyXEL Communications MSC1024G Series User Manual

Table 300 VoIP > Dialplan Screen
LABEL
Interdigit Timeout
Apply
New
Cancel
Index
Dialplan Name
Select
Modify
Delete

18.13 The Localcall Screen

The local call feature allows subscribers to call other subscribers if the system cannot connect
to the SIP server.
Click VoIP > Localcall to open the following screen. Use this screen to configure the system's
local call settings.
Figure 391 VoIP > Localcall
The following table describes the labels in this screen.
Table 301 VoIP > Localcall
LABEL
Enter Time
Exit Time
Sync
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Enter the maximum number of seconds the system waits for each digit input of a
complete callee number after you press the flash key on the phone. If the system
does not receive the next digit entered within this time period, the system
processes digits the caller has dialed.
Click Apply to save the changes in this screen to the system's volatile memory.
The system loses these changes if it is turned off or loses power, so use the
Config Save on the navigation panel and then the Save button to save your
changes to the non-volatile memory when you are done configuring.
While you are modifying a dialplan table, you can click New to start configuring a
fresh table without saving your changes.
Click Cancel to start configuring the screen again.
This is an incremental number indicating the order in which the dialplans were
created.
These are the names of individual tables. The DEFVAL table always exists, and
is assigned to all ports by default.
Select an entry you wish to modify or delete.
Select an entry and click this in order to edit its configuration.
Select an entry and click this to delete the profile. Once deleted, information
cannot be retrieved.
DESCRIPTION
Set how long the system should wait after losing the connection to the SIP server before
using the local call feature.
Set how long the system should wait after regaining the connection to the SIP server
before it stops using the local call feature.
Click Sync to update the VOP cards with the MSC's latest VOP card IP address, port
number, and telephone number settings.
Chapter 18 VoIP
569