This command sets the system to send logs to an external syslog server. An example is shown
next.
ras> sys syslog enable
35.5.3 sys syslog disable Command
Syntax:
sys syslog disable
This command sets the system to not send logs to an external syslog server. An example is
shown next.
ras> sys syslog disable
35.5.4 sys syslog show Command
Syntax:
sys syslog show
This command displays the syslog settings. An example is shown next.
ras> sys syslog show
status
: disabled
facility server ip
-------- ---------------
local1
0.0.0.0
local2
0.0.0.0
local3
192.168.1.43
local4
0.0.0.0
local5
0.0.0.0
local6
0.0.0.0
local7
0.0.0.0
ras>
35.6 sys user Commands
Use these commands to configure the system's administrator account and authentication
settings.
35.6.1 sys user auth Command
Syntax:
sys user auth <mode>
MSC1000G/1024G/1224G Series User's Guide
Chapter 35 sys Commands
927