Acl Macfilter Disable Command; Acl Macfilter Enable Command; Acl Macfilter Mode Command; Acl Macfilter Set Command - ZyXEL Communications MSC1024G Series User Manual

The following example removes the source MAC address of a0:c5:12:34:56:78 from the MAC
filter for ADSL port 5.
ras> acl macfilter delete 5-4 a0:c5:12:34:56:78

21.9.2 acl macfilter disable Command

Syntax:
acl macfilter disable <slot-port>
This command turns off the MAC filtering feature on a line card's specified DSL port(s).
The following example turns off the MAC filtering feature on DSL port 4 of the line card in
slot 5.
ras> acl macfilter disable 5-4

21.9.3 acl macfilter enable Command

Syntax:
acl macfilter enable <slot-port>
This command turns on the MAC filtering feature on a line card's specified DSL port(s).
The following example turns on the MAC filtering feature on DSL port 4 of the line card in
slot 5.
ras> acl macfilter enable 5-4

21.9.4 acl macfilter mode Command

Syntax:
acl macfilter mode <slot-port> accept|deny
where
accept|deny

21.9.5 acl macfilter set Command

Syntax:
acl macfilter set <slot-port> <mac>
where
MSC1000G/1024G/1224G Series User's Guide
= accept: Allows frames from MAC addresses that you specify and block
frames from other MAC addresses.
Blocks frames from MAC addresses that you specify and allow
deny:
frames from other MAC addresses.
= The source MAC address in "a0:c5:12:34:56:78" format.
<mac>
Chapter 21 acl Commands
603