Chapter 34 switch Commands
34.12.9 switch port name Command
Syntax:
switch port name <giga-port> <name>
where
This command sets the name of a Gigabit Ethernet interface.
The following example sets the name of uplink interface 1 to
ras>
switch port name up1 xyz
34.12.10 switch port priority Command
Syntax:
switch port priority <giga-port> <priority>
where
This command sets the default ingress user priority of a Gigabit Ethernet interface.
The following example sets the default priority of uplink interface 1 to 3.
ras> switch port priority up1 3
34.12.11 switch port pvid Command
Syntax:
switch port pvid <giga-port> <vid>
where
This command sets the Port VLAN ID assigned to untagged frames or priority frames (0 VID)
received on this port(s).
The following example sets the PVID of uplink interface 1 to 76.
ras>
switch port pvid up1 76
900
=
A name to identify the port.
<name>
=
The default ingress priority (0~7).
<priority>
The default Port VLAN ID (PVID) assigned to untagged frames or
<pvid>
=
priority-tagged frames received on this port. 1~4094.
.
xyz
MSC1000G/1024G/1224G Series User's Guide