where
<profile>
This command displays which ADSL ports are set to use the specified alarmadsl profile.
The following example displays which ADSL ports use the SESalarm alarmadsl profile.
ras> profile alarmadsl map SESalarm
32.7 profile alarme1 Commands
Configure E1 profiles to set alarm settings and thresholds for the E1 ports.
32.7.1 profile alarme1 show Command
Syntax:
profile alarme1 show [profile]
where
profile
This command displays the details of the specified E1 alarm profile or lists all of the E1 alarm
profiles if you do not specify one.
The following example displays the default E1 alarm profile (DEFVAL).
ras> profile alarme1 show DEFVAL
e1 alarm profile : DEFVAL
qes
qses
quas
dayes
dayses
dayuas
ras>
32.7.2 profile alarme1 set Command
Syntax:
profile alarmadsl set <profile> [qes <qes>] [qses <qses>] [quas <quas>]
[dayes <dayes>] dayses <dayses>] [dayuas <dayuas>]
where
profile
qes
MSC1000G/1024G/1224G Series User's Guide
=
The name of an alarm profile.
=
The name of an E1 alarm profile.
:
0
:
0
:
0
:
0
:
0
:
0
=
The name of an E1 alarm profile (up to 31 English keyboard characters).
=
The number of Error Seconds (0~900) that are permitted to occur within 15
minutes.
Chapter 32 profile Commands
777