Switch Port Setup 802.1P/1Q Screen; Switch Port Setup Bandwidth Screen - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

15.13 Switch Port Setup 802.1P/1Q Screen

Click Switch > Switch Port Setup > 802.1P/1Q in the navigation panel to display the screen

shown next. Use this screen to configure IEEE 802.1p priority and IEEE 802.1Q VLAN

settings for the Gigabit Ethernet interfaces.

Figure 343 Switch Port Setup: 802.1P/1Q

The following table describes the labels in this screen.

Table 252 Switch Port Setup: 802.1P/1Q

Default Priority

Default VLAN ID

Click Switch > Switch Port Setup > Bandwidth in the navigation panel to display the screen

shown next. Use this screen to configure bandwidth control settings for the Gigabit Ethernet

MSC1000G/1024G/1224G Series User's Guide

This is the label of a Gigabit Ethernet interface.

Select a default priority to use for frames that come into the interface without a

IEEE 802.1p priority tag.

Select a default VLAN ID to use for frames that come into the interface without a

IEEE 802.1Q VLAN ID.

Select this check box to turn on GARP VLAN Registration Protocol to have the

interface propagate VLAN information to other devices.

Clear the check box to not have the interface propagate VLAN information to other

Select all to have the interface accept all Ethernet frames. Select tag to have the

interface only accept frames with an IEEE 802.1Q VLAN tag.

Select this check box to have the interface use VLAN trunking in order to accept

frames with any VID.

Clear the check box to have the interface only accept frames with registered VIDs.

Click Apply to save the changes in this screen to the system's volatile memory.

The system loses these changes if it is turned off or loses power, so use the

Config Save on the navigation panel and then the Save button to save your

changes to the non-volatile memory when you are done configuring.

Click Cancel to begin configuring this screen afresh.

Chapter 15 Switch Screens

Msc1224g series Msc1000g series