Vdsl2 Port Setup Line Card Screen - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Chapter 11 Subscriber Port Setup Screens

Table 96 Port > VDSL2 (continued)

11.9.1 VDSL2 Port Setup Line Card Screen

Click Port > VDSL2 in the navigation panel to open the VDSL2 Port Setup screen. Click the

slot number of an active VDSL line card to open the following screen. Use this screen to

configure settings for individual VDSL ports and copy settings between ports.

Figure 146 Port > VDSL2: Line Card

The following table describes the fields in this screen.

Table 97 Port > VDSL2: Line Card

This field displays how long the line card has been running since the last time it

was started.

This field displays the current firmware version installed on the line card.

Click this to return to the previous screen.

Do the following to copy settings from one DSL port to another DSL port or ports.

1. Use the Select column to choose a DSL port from which you want to copy

2. Click Copy to display the following screen.

Figure 147 Copy

3. Select a line card to which you want to copy settings.

4. Select the check boxes of the DSL ports on the line card to which you want to

copy the settings. Click Select All to mark all of the port check boxes or click

Select None to clear all of the port check boxes.

5. Click Apply to copy the settings to all of the ports that you have selected in this

screen. Click Cancel to close the screen without saving changes.

MSC1000G/1024G/1224G Series User's Guide

Msc1224g series Msc1000g series