ZyXEL Communications MSC1024G Series User Manual page 812

Chapter 32 profile Commands
where
keypattern
<pattern-
table>
nopassword
password
<password>
registration
re
numberplan
<cc>
<ndc>
<numberplan-
table>
localhelp
<tel-number>
<localhelp-
table>
dnd
dtmf bypass
dtmf rfc2833
dtmf sipinfo
dtmf
rfc2833like
callhold
callwait
callreturn
cidcw
clip
812
= Has the call service profile use a VoIP key pattern.
Specify the VoIP key pattern to use.
=
= The call service profile does not require a password (default).
= The call service profile requires a password.
The call service profile's password.
=
= When this is off. the call service profile does not use the registration
timeout feature.
Choose on and enter a time period (<re>) to have the system use the
registration timeout feature. If the system does not receive a registration
confirmation message from the SIP server in the time specified, it drops the
connection.
Select off to not use the registration timeout feature.
This is the registration expiration time in seconds, 120~65535.
=
= When this is off, the call service profile does not reference a configured
numbering plan. When this is on, the call service profile references the
specified numbering plan.
The country code. This defines the digits the numbering plan inserts when
=
a rule contains "\c".
The national destination code. This defines the digits the numbering plan
=
inserts when a rule contains "\d".
The numbering plan this call service set is to use.
=
= When this is off, the call service profile does not have users access a
local help table when they call a specific telephone number.
To have this call service profile use a local help table, choose on and
specify a telephone number (tel-number) and the name of the local help
table (localhelp-table) users are to access when they call the
telephone number.
The local help telephone number, up to 15 characters.
=
= The name of the local help table name, up to 31 characters
Do not Disturb allowed/prohibited.
=
The system does not relay DTMF signals.
=
= The system relays DTMF signals according to RFC 2833.
= The system relays DTMF signals as SIP INFO messages.
The system relays DTMF signals as SIP INFO messages, but carried as
=
RFC 2833 payload.
= Call holding allowed/prohibited.
= Call waiting allowed/prohibited.
Call return allowed/prohibited.
=
Calling Identity Delivery on Call Waiting allowed/prohibited.
=
= Caller Line Identification Presentation allowed/prohibited.
MSC1000G/1024G/1224G Series User's Guide