Profile Acl Show Command; Profile Adsl Commands; Profile Adsl Set Command - ZyXEL Communications MSC1024G Series User Manual

This command configures an ACL rule to classify the upstream traffic and perform action(s)
on the classified traffic.
The following creates an ACL rule example named
priority level of 2. This rule limits the rate on the classified traffic to 1024 kbps and changes
the priority level to 7.
ras> profile acl set test vlan 10 priority 2 rate 1024 rpri 7
32.4.3.1 Configuration Guidelines
• You can apply one classifier for a protocol on a port's PVC.
• You cannot create a classifier that contains matching criteria for layer 2 and layer 3 fields.
For example
as protocol type and VLAN do not belong to the same network layer.
• Each type of criteria can only be used once in a classifier. For example,
set test protocol tcp protocol udp deny
you need to create a separate classifier for each protocol and apply them to the same
PVC(s).

32.4.4 profile acl show Command

Syntax:
profile acl show [<profile>]
This command displays the name(s) of the profile(s) you have configured.
ras> profile acl show
acl profile(s):
--------------
1. example
ras>

32.5 profile adsl Commands

Use the
profile adsl

32.5.1 profile adsl set Command

Syntax:
profile adsl set <profile> <us-max-rate> <ds-max-rate>
[fast|delay <us-delay> <ds-delay>]
[minrate <us-min-rate> <ds-min-rate>]
[usmgn <us-max-mgn> <us-min-mgn> <us-tgt-mgn>]
[dsmgn <ds-max-mgn> <ds-min-mgn> <ds-tgt-mgn>]
[usra fixed|startup|runtime <us-us-mgn> <us-ds-mgn>]
[dsra fixed|startup|runtime <ds-us-mgn> <ds-ds-mgn>]
MSC1000G/1024G/1224G Series User's Guide
profile acl set test protocol tcp vlan 15 deny
commands to configure ADSL profiles.
Chapter 32 profile Commands
for traffic from VLAN 10 with a
test
profile acl
is not allowed. For this example,
is not allowed
771