2 Set the VOP card's IP information.
Use the VoIP > IP screen (see
• Enter the Slot number of the H.248-enabled VoIP line card (3 in this example).
• Set the VOP card's IP address to 192.168.3.174.
• Enter 24 as the netmask for the VOP card.
• Enter 2 as the VID.
• Click Apply. The new VOP IP record displays in the list at the bottom of the screen.
Figure 26 VOP IP Address Example
3 Set the VOP as a signaling card.
Use the VoIP > VoIP H248 screen (see
• Select the Slot in which you installed the H.248-enabled VoIP line card (3 in this
example).
• Set the Operational Mode to signal.
• Click Apply. The new H.248 settings display in the list at the bottom of the screen.
Figure 27 VoIP > VoIP H248 Example
MSC1000G/1024G/1224G Series User's Guide
Section 18.6 on page
559).
Section 18.9 on page
Chapter 4 Tutorials
563).
81