This command deletes the specified gbond group. The following is an example.
ras> port gbond delete 2 group2
ras> port gbond show 2
slot bond name
port list
---- ----------------------------------------
2 Group1
1,2
31.12 Port h248 Commands
Use these commands to configure the H.248 ports.
31.13 port h248 set Command
Syntax:
port h248 set <slot-port> <dsp_profile>
This command sets which DSP (Digital Sound Processing) profile the specified H.248 ports
use.
The following example sets ports 1~24 on the VOP card in slot 3 to use the DEFVAL DSP
profile.
ras> port h248 set 3-1~24 DEFVAL
31.14 port h248 termination Command
Syntax:
port h248 termination <slot-port> <name> [<step>]
where
step
This command creates terminations for H.248 ports. The termination name can be up to 32
characters.
The following example sets ports 1~24 on the VOP card in slot 3 to use termination names
A301~A324.
ras> port h248 termination 3-1~24 A301 1
MSC1000G/1024G/1224G Series User's Guide
When creating multiple terminations, enter the interval between names
(-10000~10000).
For example, enter "1~10" for the ports and "1" for the step to
increment each termination name by one.
Chapter 31 port Commands
717