[psdmaskds <tone-index1> <psd-
level> [<tone-index2> <psd-
level>] ...
[psdmaskus <tone-index1> <psd-
level> [<tone-index2> <psd-
level>] ...
The profile is a list of VDSL2 line configuration settings. After you create a VDSL2 line
profile, you can have a VDSL2 template use it and then assign the VDSL2 template to VDSL2
ports.
32.18 profile voip dsp Commands
Use these commands to set up and manage Digital Signal Processing for the VoIP line cards.
Each DSP profile specifies VoIP-related attributes, such as the voice codecs to use in a given
session.
32.18.1 profile voip dsp delete Command
Syntax:
profile voip dsp delete <name>
This command removes the specified DSP profile. An example is shown to delete a DSP
profile named "digsig1".
ras> profile voip dsp delete digsig1
32.18.2 profile voip dsp map Command
Syntax:
profile voip dsp map <name>
MSC1000G/1024G/1224G Series User's Guide
Chapter 32 profile Commands
= Adjusts the MIB PSD level on downstream tones.
tone-index: Enter a number from 0 to 4096. A
tone is a sub-channel of VDSL band. DMT divides
VDSL bands into many 4.3125 kHz tones.
psd-level: Enter from 0 (0 dBm/Hz) to 255 (-
127.5 dBm/Hz) in steps of 0.5dBm/Hz.
= Adjusts the MIB PSD level on upstream tones.
803