Interface Statistics - ZyXEL Communications MSC1024G Series User Manual

The following table describes the labels in this screen.
Table 214 CFM Statistics
LABEL
MD, MA, Endpoint
Id
Load
Index
MD
MA
EPID
REPID
State
Previous, Next
14.18 H.248 Interface Statistics
To view the IES's list of H.248 interfaces and each one's status, click Statistics > H248.
Figure 303 H.248 Interface Statistics
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Use the drop-down boxes to select an MD, MA, and end point ID for which you
want to see a CFM statistics report.
Click Load to display the available CFM end points based on your selected
criteria.
This field displays the index number of a CFM end point. Click an index ID to view
detailed information on the end point.
This field displays the MD name to which an end point belongs.
This field displays the MA name to which an end point belongs.
This field displays an end point ID.
This field displays a list of associated remote end point IDs which have had a
CFM test.
This field displays the CFM end point connection status. Active means no
connectivity fault has been found. Error means a connectivity fault has been
found on this port (end point).
Click Previous or Next to respectively go to the previous or the next page if there
is more than one page of information on CFM end points.
Chapter 14 Statistics Screens
445