Show Voip Sip Serverstate Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 33 show Commands
This example shows the H.248 termination status of the H.248 interface 1's media card 1.
ras> show voip h248 termination state 1-1-1
media id
-------- --------------- ---- ----------- ----------
1

33.3.43 show voip sip serverstate Command

Syntax:
show voip sip serverstate <slot> [<proxysvr-ip> | <proxysvr-dn>]
where
<proxysvr-ip>
<proxysvr-dn>]
This command displays the status of SIP proxy server assigned to the line card in the specified
slot.
The following example shows settings on the SIP proxy server assigned to the line card in slot
3.
ras> show voip sip serverstate 3
SIP proxy server IP/domain name port state
--------------------------------------------------------------- ----- -----
--
192.168.2.20 5060 alive
192.168.2.2 5062 lost
866
media ip port phone state line state
192.168.3.174 1
= The IP address of the SIP proxy server.
The domain address of the SIP proxy server.
=
on-hook idle
MSC1000G/1024G/1224G Series User's Guide