Do not turn off your MSC while saving your configuration.
This command saves all system configurations to nonvolatile memory. You must use this
command to save any configuration changes that you make, otherwise the MSC returns to its
last saved settings when it is restarted. Save your changes after each configuration session.
Nonvolatile memory refers to the MSC's storage that remains even if the MSC's power is
turned off. Configuration changes saved in the volatile (run time) memory are lost when the
MSC is turned off.
20.7 Commands Summary
The tables in the following chapters list the commands that you can use with the MSC. The P
column on the right indicates the administrator privilege level needed to use the command (H
for high, M for middle or L for low).
MSC1000G/1024G/1224G Series User's Guide
Chapter 20 Commands
581