General Diagnostic Command Parameters - ZyXEL Communications MSC1024G Series User Manual

Chapter 26 diagnostic Commands

26.2 General diagnostic Command Parameters

The following table describes commonly used
Table 315 General diagnostic Command Parameters
NOTATION
md-name
ma-name
ep-id
remote-ep-id
mac
slot-port
slot-port-
vpi/vci
slot-gid
gid
link-id
632
DESCRIPTION
The maintenance domain name (length<32).
The maintenance association name (length<16).
The endpoint identifier (1~8191).
The remote end point identifier (1~8191).
The remote end point's MAC address.
The number of a slot and a port on the slot. For example, 2-5 means port 5 on slot
2.
The number of a slot, a port on the slot and a channel. For example, 2-5-0/33
means a channel with vpi 0 and vci 33 on port 5 of slot 2.
The card inserted in a slot, a port on that line card, and the VPI/VCI settings for the
line connected to that port, for example,: 3-1-0/33.
The number of a slot and an IMA group on the slot. For example, 2-1 means group
1 on slot 2.
The ID of an IMA group (1~8).
The ID of an E1 link (1~8). Use a comma (,) to separate links whose IDs are not
continuous. Use Tilde (~) to specify continuous link IDs. For example, 1,3,5~7
means link 1, 3, 5, 6 and 7.
command parameter notation.
diagnostic
MSC1000G/1024G/1224G Series User's Guide