Cfm Endpoint Screen: Mep - ZyXEL Communications MSC1024G Series User Manual

Table 257 CFM Maintenance Association (continued)
LABEL
Apply
New
Cancel
Add MEP ID
Apply
Index
MEPID
Delete
Cancel
Add VLAN
Apply
Index
VLAN ID
Delete
Cancel

15.17.2 CFM Endpoint Screen: MEP

Click an MA index number in the Switch > CFM > CFM maintenance association screen to
display the screen shown next. Use this screen to configure Maintenance End Points (MEPs)
under an MA.
Figure 349 CFM Endpoint: MEP
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Click Apply to add the settings as a new entry in the summary table above.
Click New to start configuring an MA setting.
Click Cancel to reset the fields.
Enter a remote MEP ID (1~8191) associated to this MA and allowed to be used in
the CFM test.
Click Apply to add the settings as a new entry in the summary table below.
This field displays the index number of a CFM endpoint.
This field displays the descriptive name of the endpoint.
Select Select All or an individual endpoint and click Delete to remove endpoint(s).
Click Cancel to reset the fields.
Enter a VLAN ID (1~4094) associated to this MA.
Click Apply to add the settings as a new entry in the summary table below.
This field displays the index number of a VLAN ID.
This field displays the ID of a VLAN.
Select Select All or an individual endpoint and click Delete to remove endpoint(s).
Click Cancel to reset the fields.
Chapter 15 Switch Screens
499