ZyXEL Communications MSC1024G Series User Manual page 314

Chapter 12 IMA Screens
The following table describes the fields in this screen.
Table 134 PVC Setup
LABEL
PVC Table
Slot
Group
Load
Index
VPI / VCI
Profile
Tag
PVID / Priority
MUX
Select
Modify
Delete
Previous 10
Previous
Page X of X
Next
Next 10
VPI/VCI
PVID / Priority
Profile
MUX
314
DESCRIPTION
This table displays the PVC settings that are configured for the selected IMA
group.
Select the number of an IMA line card's slot. The corresponding subscriber port
setup screen for the type of line card you selected automatically displays.
Select the number of an IMA group on the line card.
Click Load to display the port's PVC settings in the PVC Table.
This is the number of the PVC on this port.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI), if any. The VPI and VCI identify a channel on this port.
This field displays the ATM profile that this channel uses.
Select whether to keep VLAN tags (tag) or remove them (untag) from a frame
when the IMA line card sends the frame out through this channel.
This field displays the service provider's VLAN ID and priority settings that this
channel uses.
• The PVID here is the service provider's VLAN ID (the outer VLAN tag) that the
line card assigns to untagged frames received on this PVC.
• Priority is the IEEE 802.1p priority level for the service provider tag that the line
card adds to untagged frames that come in on this PVC. "0" is the lowest
priority level and "7" is the highest.
This field displays the encapsulation type (llc or vc) for this channel.
Select a PVC's radio button and then use the Modify, Copy or Delete button.
Select a profile's Select radio button and click Modify to edit the PVC settings.
Select a profile's Select radio button and click Delete to remove the PVC settings.
Click Previous 10 to show the preceding 10 pages of information.
Click Previous to show the preceding screen if the information cannot be
displayed in one screen.
This identifies which page of information is displayed and the total number of
pages of information.
Click Next to show the following screen if the information cannot be displayed in
one screen.
Click Next 10 to show the following 10 pages of alarms.
Type the Virtual Path Identifier and Virtual Circuit Identifier for a channel on the
IMA group. The VPI and VCI identify a channel on this group.
The PVID here refers to the service provider's VLAN ID (the outer VLAN tag).
Enter the service provider ID (from 1 to 4094) for untagged frames received on
this PVC.
Select the priority level for the service provider's VLAN ID. "0" is the lowest priority
level and "7" is the highest.
Note: Different PVCs can use the same service provider's VLAN
ID.
Use the drop-down list box to select an ATM profile to assign to this channel.
Select the encapsulation type (llc or vc) for this channel.
MSC1000G/1024G/1224G Series User's Guide