ZyXEL Communications MSC1024G Series User Manual page 835

Table 334 show enet Command Display (continued)
LABEL
UcastPkts
NUcastPkts
MCastPkts
BCastPkts
Pause
Pkt64
Pkt65~127
Pkt128~255
Pkt256~511
Pkt512~1023
Pkt1024~1518
OverSizPkt
UndSizPkt
FCSErr
AlignErr
Jabber
Fragment
Dropped
Underrun
ExCollisn
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This is the number of good unicast frames received/transmitted.
This is the number of good non-unicast frames received/transmitted.
This is the number of good multicast frames received/transmitted of 64 to 1518
octets in length (for non VLAN) or 1522 octets (for VLAN), not including Broadcast
frames. Frames with range or length errors are also not taken into account.
This is the number of good broadcast frames received/transmitted of 64 to 1518
octets in length (for non VLAN) or 1522 octets (for VLAN), not including multicast
frames. Frames with range or length errors are also not taken into account.
This is the number of valid IEEE 802.3x Pause frames received/transmitted on this
port.
This is the number of frames received/transmitted (including bad frames) that
were 64 octets or less in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received/transmitted (including bad frames) that
were 65 to 127 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received and transmitted (including bad frames) that
were 128 to 255 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received/transmitted (including bad frames) that
were 256 to 511 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received/transmitted (including bad frames) that
were 512 to 1023 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received/transmitted (including bad frames) that
were 1024 to 1518 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received/transmitted that were bigger than 1518 (non
VLAN) or 1522 (VLAN) octets and contained a valid FCS.
This is the number of frames received/transmitted that were less than 64 octets
long and contained a valid FCS.
This is the number of frames received/transmitted with an integral length of 64 to
1518 octets and containing a Frame Check Sequence error.
This is the number of frames received/transmitted that were 64 to 1518 (non
VLAN) or 1522 (VLAN) octets long but contained an invalid FCS and a non-
integral number of octets.
This is the number of frames received/transmitted that were longer than 1518
octets (non VLAN) or 1522 octets (VLAN) and contained an invalid FCS, including
alignment errors.
This is the number of frames received/transmitted that were less than 64 octets
long, and contained an invalid FCS, including non-integral and integral lengths.
This is the number of received/transmitted frames that were received by the
system, but later dropped because of a lack of system resources.
This is the number of outgoing frames that were less than 64 octets long.
This is the number of frames for which transmission failed due to excessive
collisions. Excessive collision is defined as the number of maximum collisions
before the retransmission count is reset.
Chapter 33 show Commands
835