Sys Server Show Command; Sys Snmp Commands; Sys Snmp Getcommunity Command; Sys Snmp Setcommunity Command - ZyXEL Communications MSC1024G Series User Manual

35.3.30 sys server show Command

Syntax:
sys server show
This command displays the system's service access control settings. The following is an
example.
ras> sys server show
server status
------ ------ -----
telnet V
ftp V
web V
icmp V
snmp V
ssh V
ras>

35.4 sys snmp Commands

Use these commands to configure the system's SNMP settings.

35.4.1 sys snmp getcommunity Command

Syntax:
sys snmp getcommunity <community>
where
<community>
Enter this command with the community to set the password.
The following example sets the password for incoming Get- and GetNext requests to
"Get123".
ras> sys snmp getcommunity Get123

35.4.2 sys snmp setcommunity Command

Syntax:
sys snmp setcommunity <community>
where
<community>
Enter this command with the community to set the password.
MSC1000G/1024G/1224G Series User's Guide
port
23
21
80
-
161
22
= The password for the incoming Get- and GetNext- requests from the
management station.
= The password for the incoming Set- requests from the management station.
Chapter 35 sys Commands
923