Figure 326 Statistics > Loop Guard
The following table describes the labels in this screen.
Table 238 Statistics > Loop Guard
LABEL
Slot
Port No.
Port Status
Loop Guard
Status
Total TX
Packets
Total RX
Packets
Bad Packets
Shutdown Time
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Select a card's slot number and click Load to display the cards loop guard.
This column lists the card's ports.
This field displays whether or not the port is enabled.
This field displays whether loop guard is enabled or disabled for this individual port.
This is the total number of packets the port has sent.
This is the total number of packets the port has received.
This is the number of packets the loop guard feature has detected that looped back
to the port.
If the loop guard feature detected looped back packets on this port and shut it down,
the time that it did so displays here.
Chapter 14 Statistics Screens
471