Table 327 profile Commands (continued)
COMMAND
32.4 profile acl Commands
An ACL (Access Control List) profile allows the system to classify and perform actions on the
upstream traffic.
32.4.1 profile acl delete Command
Syntax:
profile acl delete <profile>
This command removes the specified ACL profile.
You cannot remove the ACL profile(s) that is currently in use.
32.4.2 profile acl map Command
Syntax:
profile acl map <profile>
This command displays the DSL port(s) to which the specified ACL profile is applied.
The following example displays the port mapping table for the
ras> profile acl map example
port pvc
----- ------------------------------------------------------
3- 1 0-33
32.4.3 profile acl set Command
Syntax:
profile acl set <name> <rule> <action>
MSC1000G/1024G/1224G Series User's Guide
callsvc
[<name>]
show
Chapter 32 profile Commands
DESCRIPTION
mwi: Turns the message waiting
indicator on or off.
reanswer: When the system is using
v5sip mode, use this field to set the
reanswer time period. The reanswer
time controls the length of time
between the user hanging up the
phone, and the call being disconnected
(the BYE request being sent).
Displays details of the specified call
service plan, or the names of all
configured profiles if no name
specified.
ACL profile.
example
P
L
769