clir
dndoff
dndon
callin
repeat dialing
37.12 voip sip localhelp Commands
Use these commands to manage the local help feature used by the VoIP line cards. Local help
lets you configure which local subscribers are called instead of public emergency (or other)
numbers in the event that the link to the VoIP provider is not available.
37.12.1 voip sip localhelp delete Command
Syntax:
voip sip localhelp delete <name>
where
<name>
This command removes the specified local help table. An example is shown to delete the local
help table named "localhelp_table".
ras> voip sip localhelp delete localhelp_table
37.12.2 voip sip localhelp map Command
Syntax:
voip sip localhelp map [<name>]
This command displays the SIP call service profile(s) that refer(s) to the specified local help
table.
An example is shown using the local help table named "localhelp_table".
ras> voip sip localhelp map localhelp_table
MSC1000G/1024G/1224G Series User's Guide
=
Enter the sequence of keys the user presses to restrict his/her phone
number by not sending caller ID information (1~7 characters).
=
Enter the sequence of keys the user presses to turn off Do Not
Disturb (1~7 characters).
=
Enter the sequence of keys the user presses to turn on Do Not
Disturb (1~7 characters).
=
Enter the sequence of keys the user presses to turn on the Call In
feature. When the Call In feature is active, the system limits call
ringing time to ten seconds.
Enter the sequence of keys the user presses to turn on the repeat
=
dialing feature.
The local help table name (<=32 characters).
=
Chapter 37 voip Commands
957