Table of Contents
Advertisement
Chapter 11 Subscriber Port Setup Screens
Figure 178 Port > VoIP H248 Screen
The following table describes the labels in this screen.
Table 119 Port > VoIP H248 Screen
LABEL
Slot
Port
Load
Enable
DSP Profile
Customer Information
Termination
TEL
286
DESCRIPTION
Use the drop-down list boxes to select the port on an active VoIP line card
you want to configure.
Click this to display the port's current settings.
Select the check box to activate H.248-based VoIP on the specified port.
Select the digital sound processing profile the port should use. If you have
not configured any profiles, only the default profile DEFVAL can be
selected. Configure DSP profiles in the Profile > VoIP DSP screen.
Enter information to identify the subscriber connected to this port. You can
use up to 31 printable ASCII characters (including spaces and hyphens).
Enter the name for this port's H.248 Termination. By default, the port's
Termination name is "termX", where X is the port number. To see a port's
current Termination name, click the line card's number in the lower panel
of this screen. Enter up to 31 alphanumeric characters. Spaces are not
allowed.
This field displays the H.248 Termination name of the port. The
Termination name is assigned by the media gateway controller.
MSC1000G/1024G/1224G Series User's Guide
Advertisement
Table of Contents
Troubleshooting
