ZyXEL Communications MSC1024G Series User Manual page 767

Table 327 profile Commands (continued)
COMMAND
MSC1000G/1024G/1224G Series User's Guide
callsvc set <name>
[keypattern
<pattern-table>]
[nopassword |
{password
<password>}
[registration
off|{on [<re>]}]
[numberplan
off|on {<cc>
<ndc>
<numberplan-
table>}]
[localhelp
off|on {<tel-
number>
<localhelp-
table>
[<tel-number>
<localhelp-
table>...]}]
[dnd on|off]
[dtmf
bypass|rfc2833|s
ipinfo|rfc2833li
ke|plaintext]
[callhold
on|off]
[callwait
on|off]
[callreturn
on|off]
[cidcw on|off]
[clip on|off]
[clir on|off]
[calltransfer
on|off]
[fax t38|g711]
[flash
invite|rfc2833|r
fc2833like|sipin
fo1|sipinfo2|sip
info3|sipinfo4|{
sipinfo5
[<rc>]}|{sipinfo
6 [<si>]}
[localcall
on|off]
[mwi on|off]
[reanswer <ra>]
Chapter 32 profile Commands
DESCRIPTION
Configures a new call service profile.
keypattern: Enter the VoIP key
pattern to use.
Once the password configuration is
set, it cannot be changed.
The system supports up to 128 call
service profiles.
nopassword: No password is needed
for SIP registration.
password: A password is needed for
SIP registration.
password: The SIP registration
password (maximum 32 characters).
registration: choose on and enter
a time period (<re>) to have the
system use the registration timeout
feature. If the system does not receive
a registration confirmation message
from the SIP server in the time
specified, it drops the connection.
Select off to not use the registration
timeout feature.
numberplan: Configures whether or
not the specified call service profile
references a numbering plan and, if so,
which numbering plan.
numberplan: Disable (off) or enable
(on) this feature
cc: Local country code. This defines
the digits the numbering plan inserts
when a rule contains "\c".
ndc: Local national destination code.
This defines the digits the numbering
plan inserts when a rule contains "\d".
numberplan-table: The name of
the numbering plan to use.
localhelp: Turn the local help table
feature on or off. Specify the name of
the local help table you want users to
access when they call a specific
telephone number.
dnd: Allows (on) or prohibits (off) the
Do not Disturb feature.
bypass: Sets the system to not relay
DTMF signals.
rfc2833: Sets the system to relay
DTMF tones according to RFC2833.
sipinfo: Sets the system to relay
DTMF signals via SIP INFO message.
rfc2833like: Sets the system to
relay DTMF signals via SIP INFO but
carrying RFC2833 payload.
P
M
767