The following example displays the virtual channels of DSL port 5 on the line card in slot 2.
ras> port pvc show 2-5
pvc
--------------- ------- ----- ------ ---- ----- ------------
2-5-0/33
2-5-8/35
31.27.6 port pvc usratelimit enable Command
Syntax:
port pvc usratelimit enable <pvc>
This command activates upstream rate limiting on the PVC. The following example activates
upstream rate settings on the PVC (0/33 of port 1 on the line card in slot 5).
ras> port pvc usratelimit enable 5-1-0/33
31.27.7 port pvc usratelimit disable Command
Syntax:
port pvc usratelimit disable <pvc>
This command deactivates upstream rate limiting on the PVC.
31.27.8 port pvc usratelimit set Command
Syntax:
port pvc usratelimit set <pvc> <rate>
This command sets the maximum upstream rate (in Kbps) the PVC is allowed to use. The
following example sets the maximum PVC upstream rate to 1000 Kbps on port 1 of the line
card in slot 5.
ras> port pvc usratelimit enable 5-1-0/33
ras> port pvc usratelimit set 5-1-0/33 1000
ras> port pvc usratelimit show 5-1
pvc
-------------- ---- --------------
5-1-0/33
31.27.9 port pvc usratelimit show Command
Syntax:
port pvc usratelimit show <pvc>
MSC1000G/1024G/1224G Series User's Guide
type
mux
pvid
bridged
llc
1
bridged vcmux
2
en
rate
V
1000(kbps)
Chapter 31 port Commands
pri
mvlan profile
0
-
DEFVAL
3
-
DEFVAL
737