Table of Contents
Advertisement
Chapter 14 Statistics Screens
The following table describes the labels in this screen.
Table 205 Port Statistics: IMA Line Card: E1 Performance - 7Day
LABEL
Start day
End day
Load
Refresh
Flush
collected interval
CV
EB
ES(secs)
SES(secs)
UAS(secs)
Previous
Page X of X
Next
14.12 Dot3ad
Click Statistics > Dot3ad in the navigation panel to display the following screen. Use this
screen to view IEEE 802.3ad link aggregation settings.
Figure 294 Dot3ad
The following table describes the labels in this screen.
Table 206 Dot3ad
LABEL
Slot
Trunk
436
DESCRIPTION
Enter the starting day within the past 7 days between 1 to 7.
Enter the ending day within the past 7 days between 1 to 7. This ending day must
be equal to or greater than the starting day.
Click this to display the E1 port statistics collected during the specified days.
Click this to update this screen.
Click this to clear the counters in this screen.
This field displays the queried interval (in week day, date, time and year format)
during which the following statistics were collected.
The field displays the number of Code Violation seconds detected within the
specified days.
The field displays the number of Errored Blocks detected within the specified
days.
The field displays the number of Errored Seconds detected within the specified
days.
The field displays the number of Severely Errored Seconds detected within the
specified days.
The field displays the number of UnAvailable Seconds detected within the
specified days.
Click Previous to show the preceding screen if the information cannot be
displayed in one screen.
This identifies which page of information is displayed and the total number of
pages of information.
Click Next to show the following screen if the information cannot be displayed in
one screen.
DESCRIPTION
Select a slot containing and MSC or ELC.
Sub refers to the subtending ports while up refers to the uplink ports.
MSC1000G/1024G/1224G Series User's Guide
Advertisement
Table of Contents
Troubleshooting
