Port Ppvc Member Set Command; Port Ppvc Set Command - ZyXEL Communications MSC1024G Series User Manual

The following example removes a PVC that uses VPI 8 and VCI 36 from a PPVC with VPI 8
and VCI 35 for port 5 on the line card in slot 7.
ras> port ppvc member delete 7-5-8/35 8/36

31.26.3 port ppvc member set Command

Syntax:
port ppvc member set <slot-port-vpi/vci> <vpi/vci> <atmprofile> <level>
where
<slot-port-vpi/
vci>
<vpi/vci>
<atmprofile>
<level>
This command adds a member PVC to a PPVC. You must create the PPVC before you use this
command to add a member.
The following example adds a PVC to a PPVC with VPI 8 and VCI 35 for port 5 on the line
card in slot 7. The PVC uses VPI 8 and VCI 36, the DEFVAL ATM profile and priority queue
2.
ras> port ppvc member set 7-5-8/35 8/36 DEFVAL 2

31.26.4 port ppvc set Command

Syntax:
port ppvc set <slot-port-vpi/vci> <mux> <pvid> <priority>
where
<slot-port-vpi/
vci>
<mux>
<pvid>
<priority>
This command creates a PPVC.
MSC1000G/1024G/1224G Series User's Guide
The slot and port(s) and VPI/VCI of the PPVC.
=
The VPI and VCI of the individual PVC that you are adding to the
=
PPVC. The VPI setting can be 0 to 255. The VCI setting can be 32
to 65535 with a VPI of 0 or 1 to 65535 if the VPI is not 0.
= The name of an ATM profile.
The priority queue (0~3) to use for this PVC's traffic. 3 is the
=
highest priority.
= The slot, port(s) and VPI/VCI of the PPVC.
= The type of encapsulation:
= Set a default VID (1 to 4094) for the channel. The channel can only
forward frames with this VLAN ID. The system would drop any frames
received from the subscriber that are tagged with another VLAN ID.
Each PVC must have a unique VID since the system forwards traffic
back to the subscribers based on the VLAN ID.
Set an IEEE 802.1p default priority (0 to 7) to add to incoming frames
=
without a (IEEE 802.1p) priority tag.
Chapter 31 port Commands
llc , vcmux
733