ZyXEL Communications MSC1024G Series User Manual page 372

Chapter 13 Profile Screens
Figure 232 Profile VoIP H248 Screen
The following table describes the labels in this screen.
Table 164 Profile VoIP H248 Screen
LABEL
Name
MGC IP / Domain Name
Port
MGC2
MGC2 IP / Domain Name
Port
Transport
Encode
802.1p Priority
DSCP
372
DESCRIPTION
Enter a name for this H.248 profile.
Enter the IP address or domain name of the H.248 media gateway
controller.
Enter the listening port number of the H.248 media gateway controller, if
supplied by your VoIP provider. Otherwise, keep the default value.
If your VoIP service provider gave you details of a backup H.248 media
gateway controller (MGC)H.248, select On and enter the details in the
MGC2 IP / Domain Name and Port fields. The MSC uses the backup
MGC when the primary MGC is not available.
Otherwise, select Off.
If you selected On in the MGC2 field, enter the IP address or domain
name of the backup H.248 media gateway controller.
If you selected On in the MGC2 field, enter the listening port number of
the backup H.248 media gateway controller, if supplied by your VoIP
provider. Otherwise, keep the default value.
Choose the data transport method configured on the media gateway
controller.
Select UDP to send data to the media gateway controller via User
Datagram Protocol.
Select TCP to send data to the media gateway controller via
Transmission Control Protocol.
Choose the text encoding method configured on the media gateway
controller.
Select Long to use long form text encoding.
Select Short to use short form text encoding.
Set the IEEE 802.1p priority value for traffic using this H.248 profile.
Set the DiffServ Code Point (DSCP) value for traffic using this H.248
profile.
MSC1000G/1024G/1224G Series User's Guide