Profile Ipqos Queue Command - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

This command displays the EXAMPLE IPQoS profile settings.

ras> profile ipqos show EXAMPLE

ipqos profile : EXAMPLE

queue number

--- ------ ------ ------ ------ ------ ------

32.12.3 profile ipqos queue Command

profile ipqos queue <profile> <queue_id> <pir> <cir> <pbs> <cbs> [<level>

MSC1000G/1024G/1224G Series User's Guide

An IPQoS profile name.

0~the number of queues-1. For example, if a profile has 8 queues,

then you can use 0~7.

Peak Information Rate (PIR) is the maximum data rate allowed for

the downstream traffic flowing through the system.

Enter a number which is a multiple of 64 in the range of

128~131072 kbps.

Committed Information Rate (CIR) is the guaranteed data rate for

the downstream traffic flowing through the system.

Enter a number which is a multiple of 64 in the range of 64~65536

Note: cir < pir <= 2 x cir. For example, the cir is 1024,

you should enter the pir equal or less than 2048

(=2 x 1024).

Peak Burst Size (PBS) is the maximum burst size allowed for the

downstream traffic flowing through the system when the burst data

rate is between the predefined PIR and CIR.

Enter a number which is a multiple of 256 in the range of

3072~65536 bytes.

Committed Burst Size (CBS) is the committed burst size allowed for

the downstream traffic flowing through the system when the burst

data rate is smaller than the predefined PIR.

Enter a number which is a multiple of 256 in the range of

3072~65536 bytes.

Note: cbs <= pbs

Chapter 32 profile Commands

Msc1224g series Msc1000g series