Chapter 2 Hardware Connections
Figure 11 Transceiver Installation
Figure 12 Installed Transceiver
2.3.2.4 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module) from the slot.
1 Remove the fiber-optic cables from the transceiver.
2 Unlock the transceiver's latch (latch styles vary).
3 Pull the transceiver out of the slot.
4 Put the transceiver's dust cover on the transceiver.
Figure 13 Opening the Transceiver Latch
Figure 14 Removing the Transceiver
Console Port
Use the console port for local management of the MSC.
60
MSC1000G/1024G/1224G Series User's Guide