ZyXEL Communications MSC1024G Series User Manual page 872

Chapter 34 switch Commands
Table 347 switch Commands (continued)
COMMAND
qschedule
queuemap
vlanpri
872
enable <giga-port>
<mstid>
pathcost <giga-
port> <mstid>
<pathcost>
p2plink <giga-
port>
auto|enable|disabl
e
priority <giga-
port> <mstid>
<priority>
show <mstid>
[<end_mstid>]
name <giga-port> <name>
priority <giga-port>
<priority>
pvid <giga-port> <vid>
show
speed <giga-port>
<speed>
vlantrunk disable <giga-
port>
enable <giga-port>
set <giga-port> spq
or
<giga-port> wrr
<wt0> <wt1> <wt2>
<wt3> <wt4> <wt5>
<wt6> <wt7>
show
set <priority> <queue>
show
disable
enable
delete <vid>
DESCRIPTION
Activates MSTP on the port in the
spanning tree instance.
Sets the path cost (0~200 000 000). Enter
0 to have the system automatically set the
path cost based on the link speed.
Enables point-to-point connection.
Specify the priority (0~255) of the Ethernet
port in the MST region. The system
automatically rounds the number to the
nearest multiple of 16.
Displays MSTP settings.
Sets the name of a port.
Sets a port's default ingress user priority
(0~7).
Sets the PVID (Port VLAN ID) (1~4094)
assigned to untagged frames or priority
frames (0 VID) received on this port(s).
Displays port settings.
Sets a port's speed and duplex mode.
Turns off VLAN trunking on a port to have it
only accept frames with registered VIDs.
Turns on VLAN trunking on a port to have it
accept frames with any VID.
Sets a port's queuing method and/or
priority weight.
spq: strict priority queuing algorithm
wrr: weighted round robin queue algorithm
priority weight, 0~15
wt0~wt7:
Displays the queuing settings.
Sets a queue's priority.
Displays the queues' priorities.
Turns off assigning of priority to traffic
based on its VLAN.
Turns on assigning of priority to traffic
based on its VLAN.
Removes the VLAN-based priority setting
for the specified VLAN ID.
MSC1000G/1024G/1224G Series User's Guide
P
M
M
M
M
L
M
M
M
L
M
M
M
M
L
M
L
M
M
M