Ima Group Performance - Last 7 Days - ZyXEL Communications MSC1024G Series User Manual

Chapter 14 Statistics Screens
Table 234 IMA Statistics: IMA Line Card: Group 96Q (continued)
LABEL
Page X of X
Next
Next 10

14.23.13 IMA Group Performance - Last 7 Days

Use this screen to display the performance of an IMA group collected during the specified
days of the past 7 days. Click the slot number in the Statistics > IMA screen, the index
number of the IMA group (see
following screen opens.
Figure 323 IMA Statistics: IMA Line Card: Group 7Day
The following table describes the labels in this screen.
Table 235 IMA Statistics: IMA Line Card: Group 7Day
LABEL
Start day
End day
Load
Refresh
collected interval
IMAUAS(secs)
NE-Failures
FE-Failures
Previous
468
DESCRIPTION
This identifies which page of information is displayed and the total number of
pages of information.
Click Next to show the following screen if the information cannot be displayed in
one screen.
Click Next 10 to show the following 10 pages of alarms.
Figure 311 on page
DESCRIPTION
Enter the starting day within the past 7 days between 1 to 7.
Enter the ending day within the past 7 days between 1 to 7. This ending day must
be equal to or greater than the starting day.
Click this to display the IMA group statistics collected during the specified days.
Click this to update this screen.
This field displays the queried interval (in week day, date, time and year format)
during which the following statistics were collected.
This field displays the number of UnAvailable Seconds detected in this IMA group
within the specified period.
This field displays the number of upstream failures detected in this IMA group
within the specified period.
This field displays the number of downstream failures detected in this IMA group
within the specified period.
Click Previous to show the preceding screen if the information cannot be
displayed in one screen.
452) and then the Group 7Day tab, the
MSC1000G/1024G/1224G Series User's Guide