15.10 MSTP Setup
Use the MSTP screens to enable MSTP on the switch and configure MSTP bridge and port
settings.
15.10.1 MSTP Bridge Settings
Click Switch > MSTP in the navigation panel to display the screen shown next. Use this
screen to configure MSTP and RSTP settings.
Figure 336 MSTP: Bridge
The following table describes the labels in this screen.
Table 249 MSTP: Bridge
LABEL
Config Name
Revision Level
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Enter a descriptive name (up to 31 characters) of an MST region.
Enter a number to identify a region's configuration. Devices must have the same
revision level to belong to the same region.
Chapter 15 Switch Screens
485