Mac Filter Screen - ZyXEL Communications MSC1024G Series User Manual

Figure 51 MAC Count: Slot
The following table describes the labels in this screen.
Table 20 MAC Count: Slot
LABEL
UP
Copy
Port
Enable
Limited Number
of Learned MAC
Address
Select

5.7 MAC Filter Screen

Use MAC filter to allow or block frames from MAC (Media Access Control) address(es) that
you specify to come in through a port. You may specify up to ten MAC addresses per port.
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select
All to select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the DSL port.
This field displays whether the MAC count limit is activated on the specified DSL
port or not (V for enabled, - for disabled).
This fields displays how many MAC addresses a port may dynamically learn.
Select the radio button of the port from which you want to copy settings.
Chapter 5 Access Control List Screens
109