ZyXEL Communications MSC1024G Series User Manual page 871

Managment switch card
Hide thumbs Also See for MSC1024G Series:
Table of Contents

Advertisement

Table 347 switch Commands (continued)
COMMAND
oam
port
MSC1000G/1024G/1224G Series User's Guide
priority
<mstid> <priority>
revision
<revision level>
show
version
rstp|mstp
vlanmap
<mstid> <vid>
[<end_vid>]
port
disable <slot-
port>
enable <slot-port>
mode <slot-port>
active|passive
rmtlpbk disable
<slot-port>
rmtlpbk enable
<slot-port>
show
<slot>
disable
<giga-port>
enable
<giga-port>
flowctrl
disable <giga-
port>
enable <giga-port>
frametype <giga-port>
all|tag
gvrp
disable <giga-
port>
enable <giga-port>
mode
<giga-port>
uplink|subtend
mstp
disable <giga-
port> <mstid>
Chapter 34 switch Commands
DESCRIPTION
Sets the priority of the switch for the
instance ranges. The lower the number,
the more likely the switch will be chosen as
the root bridge.
Enter 0, 4096, 8192, 12288, 16384, 20480,
24576, 28672, 32768, 36864, 40960,
45056, 49152, 53248, 57344 or 61440 in
this field.
Sets the configuration version number (0 -
65535).
Displays MSTP settings.
Sets the spanning tree protocol version the
switch uses.
Sets the VLAN-MSTID mapping.
Turns off OAM functionality for the selected
Ethernet line card port.
Turns on OAM functionality for the selected
Ethernet line card port.
Select active to allow the port to initiate
or respond to OAM status exchange
requests.
Select passive to have the port respond
to OAM status exchange requests but not
initiate them.
Disables remote loopback tests on the
port.
Enables remote loopback tests on the port.
OAM must also be enabled with the mode
set to active for the port to be able to send
loopback tests.
Displays a line card's OAM settings.
Turns off data transmission on a port.
Turns on data transmission on a port.
Turns off flow control on a port.
Turns on flow control on a port.
Sets the port(s) to accept VLAN tagged
and untagged Ethernet frames or only
tagged.
Turns on GVRP for a port(s).
Turns off GVRP for a port(s).
Sets a port to operate as uplink or
subtending.
Deactivates MSTP on the port in the
spanning tree instance.
P
M
M
L
M
M
M
M
M
M
M
L
M
M
M
M
M
M
M
M
M
871

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msc1224g seriesMsc1000g series

Table of Contents