ZyXEL Communications MSC1024G Series User Manual page 335

Figure 211 Profile > VDSL2 > LineProfile
The following table describes the labels in this screen.
Table 145 Profile > VDSL2 > LineProfile
LABEL
Name
VDSL2 Profile
Max SNR Margin
Target SNR Margin
Min SNR Margin
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Enter a descriptive name for identification purposes.
Specify the VDSL2 profile(s) you want to apply to this line profile. See
11.2.4 on page 210 for more information.
Enter the maximum SNR (Signal to Noise Ratio) margin allowed on the line.
When the actual SNR margin is going to reach this specified value, this
mechanism forces connected CPE device(s) to lower its transmission power
level and maintains the actual SNR margin equal to or less than this value.
Select noLimit to turn this mechanism off.
Enter the target downstream and upstream SNR (Signal to Noise Ratio) margin.
Enter the minimum downstream and upstream SNR margin accepted on the line
to which this profile applies.
Chapter 13 Profile Screens
Section
335