ZyAIR G-300 User's Guide
LABEL
Link Strength
The status bar and the percentage number or a number in dBm show the strength of the
signal.
Rescan
Click Rescan to re-establish connection to the wireless device whose SSID is shown in
the State field.
2.3.1 The Advanced Configuration Screen
In the Configuration screen, click Advanced to display the pop-up screen as shown.
The following table describes the labels in this screen.
LABAL
Power Save
Select this check box to reduce power consumption (especially for laptop computers).
Enable
This forces the ZyAIR to go to sleep mode when it is not transmitting data.
2-12
Table 2-1 Configuration
Figure 2-10 Configuration: Advanced
Table 2-2 Configuration: Advanced
This only works if the wireless device to which the ZyAIR is
connected also supports this feature.
DESCRIPTION
DESCRIPTION
Using the ZyAIR Utility