Configuring A Dhcp Sip Server (Cli Procedure) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Configuring a DHCP SIP Server (CLI Procedure)

Related
Documentation
544
®
OS for EX Series Ethernet Switches, Release 10.4
You can use the
sip-server
a DHCP server. The DHCP server sends configured option values—Session Initiation
Protocol (SIP) server addresses or names—to DHCP clients when they request them.
Previously, you were only allowed to specify a SIP server by address using
. You specify either an IPv4 address or a fully qualified domain
services dhcp option 120]
name to be used by SIP clients to locate a SIP server. You cannot specify both an address
and name in the same statement.
To configure a SIP server using the
[edit system services dhcp]
user@switch# set sip-server address
For example, to configure one address:
[edit system services dhcp]
user@switch set sip-server 172.168.0.11
To configure a SIP server using the
[edit system services dhcp]
user@switch# set sip-server name
For example, to configure a name:
[edit system services dhcp]
user@switch set sip-server abc.example.com
DHCP Services for EX Series Switches Overview on page 539
See the Junos OS System Basics Configuration Guide.
statement on the EX Series switch to configure option 120 on
address option:
option:
name
[edit system
Copyright © 2010, Juniper Networks, Inc.