Table 92: Show Bridge Table Output Fields; Monitoring Subscriber Policy Rules - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide

Table 92: show bridge table Output Fields

Related Topics

Monitoring Subscriber Policy Rules

Display the set of forwarding and filtering rules for all subscriber policies configured
Purpose
on the router, or for a specified subscriber policy.
To display the rules for a specified subscriber policy:
Action
host1#show subscriber-policy client01
To display the rules for all default and nondefault subscriber policies configured on
the router:
host1#show subscriber-policy
Subscriber: default Subscriber
630
Monitoring Subscriber Policy Rules
Field Name Field Description
Bridge Name of the VPLS instance for which the MAC address table is
displayed
Address MAC address of the entry
Action Specifies how the VPLS instance handles this entry: forward or
discard
Interface Interface type and specifier on which the entry is forwarded; this
value does not appear for entries that are discarded; vpls identifies
the VPLS virtual core interface
Age Length of time that a dynamic entry has been in the forwarding
table; this value does not appear for static entries
show bridge table
Subscriber: client01
ARP : Permit
Broadcast : Permit
Multicast : Deny
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Deny
Mpls : Permit
ARP : Permit
Broadcast : Deny
Multicast : Permit
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit