Avaya G450 Cli Reference Manual page 125

Table 85: SLS survivability CLI commands (continued)
Root Level First level command
Commands
ds1
Second level command
set insert-digits
(dial-pattern)
set max-length
set min-length
set tgnum
set type
(dial-pattern)
show (dial-pattern)
set
bearer-capability
set bit-rate
set
channel-numbering
set connect
set country-protocol
set interface
set
interface-companding
set long-timer
Description
Specify the number of digits to be
inserted at the beginning of the
dialed string for an outbound call
in SLS
Establish the maximum length of
the dialed string in SLS
Establish the minimum length of
the dialed string in SLS
Designate the trunk-group
number in SLS
Administer the type of outbound
call in SLS
List all dial-pattern SLS
parameters
Administer DS1 trunks for SLS
Set the Information Transfer Rate
field of the Bearer Capability IE in
SLS
Set the maximum transmission
rate for the DS1 facility in SLS
Select the channel-numbering
method for B-channels on an E1
interface in SLS
Specify the equipment at the
far-end of the DS1 link in SLS
Specify the ISDN Layer-3 country
protocol type in SLS
Specify the glare-handling
convention for a DS1 link in SLS
Set the interface to agree with the
companding method used by the
far-end of the DS1 circuit for SLS
mode
Increase the duration of the T303
(call establishment) timer in SLS
Issue 1 January 2008
4 of 11
125