Avaya G450 Cli Reference Manual page 126

Roadmap
Table 85: SLS survivability CLI commands (continued)
Root Level First level command
Commands
incoming-routing
126 Avaya G450 CLI Reference
Second level command
set name
set protocol-version
set side
set signaling-mode
show (ds1)
set delete-digits
set insert-digits
(incoming-routing)
set length
set match-pattern
show
(incoming-routing)
Description
Identify the user name for a DS1
facility in SLS
Specify country protocol for
countries whose public networks
allow for multiple ISDN Layer-3
country protocols for ISDN
Primary Rate service in SLS
Specify the glare-handling
conditions when the set
interface command has been
administered as peerMaster or
peerSlave for the ISDN link in
SLS
Set the signaling mode for the
DS1 facility in SLS
List all SLS parameters for this
DS1 interface
Administer digit-treatment for
incoming routed calls in SLS
Specify number of digits to be
deleted from the beginning of the
dialed string for an inbound trunk
call in SLS
Specify number of digits to be
inserted at the beginning of the
dialed string for an inbound trunk
call in SLS
Specify the length of the dialed
string in SLS
Specify the beginning digit
pattern of the incoming
alphanumeric dial string to be
matched against in SLS
List all incoming-routing SLS
parameters
5 of 11